| Final Patch Tuesday of the year brings fixes to Windows, Office, IE Posted: 11 Dec 2012 04:56 PM PST |
| Pica8 Rolls Out SDN Reference Architecture for Cloud Providers Posted: 11 Dec 2012 08:10 PM PST The startup's solution, which supports technologies like OpenFlow and the Open vSwitch, aims to give service providers a customizable SDN platform.  |
| Flexera Software wrote a new post, How Virtual Appliances Benefit Product Evaluations Posted: 11 Dec 2012 02:45 PM PST  By Peter Varhol
One of the most expensive parts of the software sales process can be the proof of concept (POC). Software vendors must assess the prospect's computing infrastructure, send one or more sales […]
Comments: 0  |
| Windows 8 – Customizing the Default Lock Screen Posted: 11 Dec 2012 12:30 PM PST Have you tried to change the default wallpaper on the Windows 8 lock screen? Now I live in Seattle and quite like the stylized picture of Seattle but in an enterprise environment you may want a more "corporate" image. Until now you have not been able to do this without using an unsupported method of "hacking" file permissions and replacing the default wallpaper file. Well this has now changed , the Windows 8 and Windows Server 2012 cumulative update: November 2012 allows us to customize the start screen. There is a new Group Policy that allows you to "Force a specific default lock screen image". For all the details on using this group policy setting please refer to the following TechNet article - http://support.microsoft.com/kb/2787100/EN-US. This post was contributed by Ben Hunter, a Solution Architect with Microsoft Consulting Services. Disclaimer: The information on this site is provided "AS IS" with no warranties, confers no rights, and is not supported by the authors or Microsoft Corporation. Use of included script samples are subject to the terms specified in the Terms of Use.   |
| Update Rollup 5 v2 for Exchange 2010 SP2, Exchange 2010 SP1 RU8 and Exchange 2007 SP3 RU9 Posted: 11 Dec 2012 02:19 PM PST |
| Rod Trent wrote a new post, Iron Chef, Cloud Edition. Whose Cloud will reign supreme? Posted: 11 Dec 2012 02:29 PM PST I'm here at Dell World this week. It's only the first day but I've already gotten the message. The message came quick and it was loud and clear. From discussion during an executive lunch to a Discussion Panel […] Comments: 0  |
| Enhansoft and John Dito are now friends Posted: 11 Dec 2012 10:40 AM PST Comments: 0  |
| Phil Schwan wrote a new post, ConfigMgr 2012 SP1 Client Notification Posted: 11 Dec 2012 10:28 AM PST  One of the benefits (or shortcomings, depending on who you ask) of Microsoft System Center Configuration Manager is that it is a "pull-based" technology. Communication between the client and server is initiated […]
Comments: 0  |
| Matt Benninge commented on the post, PowerShell logon script form oddities Posted: 11 Dec 2012 05:27 AM PST Ok! And nice to see some more swedes here ;) Comments: 0  |
| Dennis commented on the post, PowerShell logon script form oddities Posted: 11 Dec 2012 05:18 AM PST Never mind.
This specific fix was already implemented by PowerShell Studio 2012 in the autogenerated "hidden" parts. Comments: 0  |
| Raphael Perez wrote a new post, [Project] - CM12 Automation - RC is coming Posted: 11 Dec 2012 03:45 AM PST  Hi All,This project is really going somewhere, i received lots of inputs, including lots of Microsoft people, what is really great...Anyway..i'm finishing the RC version (final testings) and i hope i'll be able to […]
Comments: 0  |
| Matt Benninge commented on the post, PowerShell logon script form oddities Posted: 11 Dec 2012 03:33 AM PST Hi Dennis, I'm sorry but I do not understand you question, what exactly is it you need clarified?
Just to be clear, I am not a coder so I can not explain in detail what actually goes on in the code. The […] Comments: 0  |
| Dennis commented on the post, PowerShell logon script form oddities Posted: 11 Dec 2012 02:38 AM PST I actually have trouble following your code :-( You create a reference to the the form when created?
And then you relead that reference some how to work around the bug in PS? I find the labeling very […] Comments: 0  |
| Dennis became a registered member Posted: 11 Dec 2012 02:35 AM PST Comments: 0  |
| SCCM by Davis: “Ivan Kruger started the forum topic Windows 7 and WES7 Collection Queries in the group System Center Configuration Manager 2007” plus 19 more Posted: 11 Dec 2012 02:02 AM PST | |  |
- Ivan Kruger started the forum topic Windows 7 and WES7 Collection Queries in the group System Center Configuration Manager 2007
- Ivan Kruger joined the group System Center Configuration Manager 2007
- AT&T Continues to Roll Out 4G LTE to More Cities
- Windows Management Experts posted an update: DPM Tape Backup Troubleshooting While recently setting up […]
- Winston Hinton commented on the post, myITforum on Google+ communities
- Enhansoft and René Kierstein are now friends
- Jaosn Sheppard joined the group System Center Configuration Manager 2007
- antipro commented on the post, Cleaning Up Old PC Monitor Data
- Enhansoft commented on the post, Cleaning Up Old PC Monitor Data
- Nash Pherson joined the group SCCM Right-click tools
- Jaosn Sheppard became a registered member
- antipro commented on the post, Cleaning Up Old PC Monitor Data
- antipro commented on the post, Cleaning Up Old PC Monitor Data
- antipro commented on the post, Cleaning Up Old PC Monitor Data
- Rod Trent posted an update in the group Software Licensing and SAM: Did Your Company Conduct a Self-Audit for Software Compliance in 2012?
- Dana Daugherty wrote a new post, Did Your Company Conduct a Self-Audit for Software Compliance in 2012?
- Flexera Software wrote a new post, What is Desktop Transformation and What Does it Mean for Applications?
- Rod Trent posted an update in the group myITforum Bug reports, Suggestions and Comments: myITforum on Google+ communities
- Rod Trent posted an update in the group System Center Operations Manager: Lync Server 2013 Monitoring Management Pack released, update […]
- Admin for myITforum.com wrote a new post, myITforum on Google+ communities
| Ivan Kruger started the forum topic Windows 7 and WES7 Collection Queries in the group System Center Configuration Manager 2007 Posted: 10 Dec 2012 10:44 PM PST Hi Guys, I would like to know if anyone would be able to assist me in creating a collection query for all windows 7 workstations, currently we are using the below query, but we recently started investing in […] Comments: 0  | | Ivan Kruger joined the group System Center Configuration Manager 2007 Posted: 10 Dec 2012 10:37 PM PST Comments: 0  | | AT&T Continues to Roll Out 4G LTE to More Cities Posted: 10 Dec 2012 08:20 PM PST Grand Rapids, Mich., Nashua, N.H., and Wilkes-Barre, Pa., are among the latest communities to get AT&T's 4G LTE service.  | | Windows Management Experts posted an update: DPM Tape Backup Troubleshooting While recently setting up […] Posted: 10 Dec 2012 04:24 PM PST DPM Tape Backup Troubleshooting
While recently setting up tape library sharing in DPM 2012 in an enterprise class environment I ran into several snags. So let's explore those hurdles and how we can overcome them! But before we dive into the fun lets get some acronyms out of the way:
● LCS (Library Control Server) server: the only DPM server that controls the medium changer. This server also shares its tape configuration with the LTC.
● LTC (Library Tape Client): Any DPM server that connects to the LCS. It asks the LCS to handle media on it's behalf. First Steps
Run through ALL the steps listed in this great article: http://blogs.technet.com/b/dpm/archive/2011/12/20/how-to-troubleshoot-tape-library-sharing-configuration-issues-in-dpm-2010.aspx
EXCEPT the last one as you really should not have to move the LCS to a new host. If you're at that point, you should just rebuild the LCS.
Issue One
First problem is how do you make one tape library accessible to many DPM servers? Tape library sharing! While this is a good attempt to make tape backups work in an enterprise, it comes with it's share of problems. So assuming you've followed the instructions at http://technet.microsoft.com/en-us/library/hh758124.aspx you should have a working library right? No! Now onto problem 2. Issue Two
The link above doesn't make any mention of SAN zoning other than "The tape library must be in a storage area network (SAN) environment." Well, this is a bit misleading and what does it really mean? Also, how about multi-pathing, how is that handled? So let's break it down:
1 If the tape library has a separate WWN for the robotics, then use it! This allows the zoning of only the robotics or media changer to the LCS and the drives to the LTC.
2 If the tape library does not have separate WWNs for the media changer and drives then you will have to take note of section 2 "Check the Medium Changer in Device Manager" http://blogs.technet.com/b/dpm/archive/2011/12/20/how-to-troubleshoot-tape-library-sharing-configuration-issues-in-dpm-2010.aspx. Since the LTC can see the media changer, you need to be sure to disable the media changer device so that TLC cannot communicate with the media changer.
3 The MPIO feature built into Windows can combine multiple paths for SAN devices, however, this does not work for tape drives. If you do both, then the OS will see 1 drive as two separate drives and you will have a mess in DPM. So you can only zone the drives and robotics on one path. Issue Three
Even after getting tape library sharing to work and setting the auto refresh to the minimum five minutes, there are still time when the library does not show in the GUI. From my understanding this can happen when two LTCs access the TLS at the same time. But after waiting a few minutes and hitting refresh the library comes back up and you can proceed. However, there are several instance where the tape library information on the LTC does not match the TLS. For example, the TLS shows one library, two drives, and twenty slots, but the LTC only shows part of that. The easiest solution in this is to start over. However that is not documented anywhere. You could try the below, which won't work.
AddLibraryServerForDpm.exe -DpmServerWithLibrary TLS.FQDN -remove
SetSharedDpmDatabase.exe -removedatabasesharing
Why doesn't this work? Because it still leaves the linked server objects in SQL server: Another point is the sharing related settings in tbl_DLS_GlobalSetting table are not removed either.
GlobalServerDPMDB
LinkedServerName
So here's the proper way to clean up and start over on the LTC:
1 Run the built-in commands to remove sharing:
AddLibraryServerForDpm.exe -DpmServerWithLibrary TLS.FQDN -remove
SetSharedDpmDatabase.exe -removedatabasesharing
2 Manually removed the linked servers and entries in the tbl_DLS_GlobalSetting, or just run this SQL query (note the redundant 'USE [master]' and 'GO' could probably be removed, but I haven't tested the process without them):
USE [master]
GO
EXEC master.dbo.sp_dropserver @server=N'GlobalServerDPMDB', @droplogins='droplogins'
GO
USE [master]
GO
EXEC master.dbo.sp_dropserver @server=N'NewGlobalServerDPMDB', @droplogins='droplogins'
GO
USE [master]
GO
EXEC master.dbo.sp_dropserver @server=N'OldGlobalServerDPMDB', @droplogins='droplogins'
GO
use [DPMDB]
DELETE FROM [DPMDB].[dbo].[tbl_DLS_GlobalSetting]
WHERE PropertyName = 'GlobalServerDPMDB' OR PropertyName='LinkedServerName'
GO
3 Re-enable tape library sharing
4 Open SQL MGMT studio and run the following on a new query:
USE [DPMDB]
select * from tbl_mm_library
GO
5 There should be an entry for robot with all the settings expected. However, the DPM GUI still doesn't show it. So in the query window results, scroll to the right to the IsOffline column. If it's set to 1, aka TRUE, then that's why it's not showing up.
6 Run the below query replacing the [LibraryID] with the vaule from the results from step 5 in the LibraryID column:
update tbl_MM_Library
set IsOffline = 0
where LibraryId = '[LibraryID]'
7 Restart the DPM GUI
8 Do a fast inventory
9 Refresh the tape library info That should be it and in a few cases might not work, so you'll have to restart the process at least once.
Comments: 0  | | Winston Hinton commented on the post, myITforum on Google+ communities Posted: 10 Dec 2012 03:15 PM PST The link appears to be broken. Comments: 0  | | Enhansoft and René Kierstein are now friends Posted: 10 Dec 2012 12:38 PM PST Comments: 0  | | Jaosn Sheppard joined the group System Center Configuration Manager 2007 Posted: 10 Dec 2012 11:38 AM PST Comments: 0  | | antipro commented on the post, Cleaning Up Old PC Monitor Data Posted: 10 Dec 2012 11:19 AM PST thanks anyway Comments: 0  | | Enhansoft commented on the post, Cleaning Up Old PC Monitor Data Posted: 10 Dec 2012 11:04 AM PST Cleaning out the old monitory data will not help in this situation. I'm not sure how you would set the priority of the DVI monitor.. Honestly I have never looked. Sorry. Comments: 0  | | Nash Pherson joined the group SCCM Right-click tools Posted: 10 Dec 2012 09:25 AM PST Comments: 0  | | Jaosn Sheppard became a registered member Posted: 10 Dec 2012 09:00 AM PST Comments: 0  | | antipro commented on the post, Cleaning Up Old PC Monitor Data Posted: 10 Dec 2012 08:44 AM PST I can't edit my messages, there are some grammatical errors. :) Comments: 0  | | antipro commented on the post, Cleaning Up Old PC Monitor Data Posted: 10 Dec 2012 08:40 AM PST I removed the video card, then I cleared CMOS , so I tried to start a new windows installation with only the first DVI monitor attached, then after installing ATI drivers, I connected the DP-DVI one, then […] Comments: 0  | | antipro commented on the post, Cleaning Up Old PC Monitor Data Posted: 10 Dec 2012 08:20 AM PST well, fortunately I've remembered the password, cause I formatted and now, on another pc, I was looking for retriving password but I got this error: "The page cannot be displayed because an internal server error […] Comments: 0  | | Rod Trent posted an update in the group Software Licensing and SAM: Did Your Company Conduct a Self-Audit for Software Compliance in 2012? Posted: 10 Dec 2012 07:56 AM PST | | Dana Daugherty wrote a new post, Did Your Company Conduct a Self-Audit for Software Compliance in 2012? Posted: 10 Dec 2012 07:54 AM PST  Dilbet did...well sort of. If you skipped your self-audit then you should make it top priority for 2013. Read on to find out how to get started.
There's a good chance you will have a vendor initiated software […] Comments: 0  | | Flexera Software wrote a new post, What is Desktop Transformation and What Does it Mean for Applications? Posted: 10 Dec 2012 07:00 AM PST By: Randy Littleson
There's a lot of hype these days around desktop transformation. What exactly is it? One of the more conventional definitions is that desktop transformation is about using technologies like […] Comments: 0  | | Rod Trent posted an update in the group myITforum Bug reports, Suggestions and Comments: myITforum on Google+ communities Posted: 10 Dec 2012 05:25 AM PST | | Rod Trent posted an update in the group System Center Operations Manager: Lync Server 2013 Monitoring Management Pack released, update […] Posted: 10 Dec 2012 05:23 AM PST | | Admin for myITforum.com wrote a new post, myITforum on Google+ communities Posted: 10 Dec 2012 05:23 AM PST  As most of you know, we're just about everywhere these days. You can find us a various conferences providing community and social media support, but you can also find us in numerous places on the web. If you […]
Comments: 0  | You are subscribed to email updates from SCCM by Davis
To stop receiving these emails, you may unsubscribe now. | Email delivery powered by Google | | Google Inc., 20 West Kinzie, Chicago IL USA 60610 | System Center Configuration Manager - Davis Blog   |
No hay comentarios:
Publicar un comentario